Item No: V2213

4 Sockets Domestic Voltage Regulator 300W/450W/600W

When using V2213 domestic voltage regulator, pay attention to heat dissipation, try to keep the surface of the voltage stabilizer dry and clean, and ensure good ventilation around it. If you need to power multiple loads at the same time, please select the appropriate voltage stabilizer model according to the total current size.

Get a Quick Quote

Download PDF

Video

Share:

● Household Stabilizer: Guardian of Home Appliances
Household Stabilizer, also known as voltage stabilizers, is the guardian of home appliances.

● Power determines the scope of use
When choosing a suitable household stabilizer, you should consider its output power. You need to test how many appliances you want to provide stable power for at home.

4 Sockets Domestic Voltage Regulator 300W/450W/600W V2213

● Correct use of voltage stabilizer
If you plan to connect the voltage stabilizer to the main power supply in your home, before turning on the voltage stabilizer, remember to turn off high-power appliances such as water heaters to prevent them from consuming too much power, causing the voltage stabilizer to overload or even burn out.

In addition, if you are buying a voltage stabilizer for a specific appliance, remember to choose a voltage stabilizer with a power slightly greater than the power of the appliance to ensure the safe operation of the appliance.

Parameter

MODEL	V2213
CAPACITY	1200VA/600W
INPUT
Voltage	120VAC
Voltage Range	90-145VAC
Frequency	50Hz/60Hz(autosensin)
Joules	94J(14D391)
AC plug type	NEMA 5-15P
External Ports	RJ-45
Output
Steps of Regulation	3(2-step Boost & 1-step Buck)
Output Voltage	120VAC±10%
Max spike current	5A
5VDC USB Charging port(Optional)	2ports 2.1A Max
Output Receptacles	Nema5-15R or Universal Nema: 4pcs AVR regulated plus surge protected
Protection	Overload / short circuit: manual reset circuit switch
	Over-temperature protection: thermal switch
	Data line protection: RJ-45
	Surge protection: 94 Joules
	Data line protection: RJ-45
delay Time	30S
STATUS INDICATORS
Power On/Off LED	Green
Abnormal	Red
ENVIRONMENT
Humidity	0-95%(Non-condensing)
Noise Level	Less than 40dB at 1M