Automatic surge protector factory tells us the main reasons why the socket cannot be plugged in
The socket comes with a protective cover or safety door:
Some sockets are equipped with a protective cover or safety door, which requires tilting or increasing force to insert.
Plug and socket specifications do not match:
The specifications of the plug and socket are different, such as a 16a plug inserted into a 10a socket, or a three-level plug inserted into a two-level socket.
Internal damage to the socket:
The metal contact piece inside the socket is deformed, loose, or damaged, or there is a foreign object in the socket.
Installation problem:
The socket is improperly installed, resulting in tilting, looseness, or misalignment.
Improper use:
Frequent plugging and unplugging causes damage to the socket or plug, or excessive force is used.
Aging of socket or plug:
Long-term use causes the socket or plugs to be deformed, damaged, or worn.
Overview
Automatic surge protector factory tells you,The socket has a protective cover or safety door; The specifications do not match; The metal contact piece inside the socket is deformed, loose, damaged, or there is a foreign object in the socket; The socket is improperly installed, and the socket or plug is damaged due to frequent plugging and unplugging, or excessive force; The socket or plug is aging.
The socket at home is too tight, and the solution to the difficulty of inserting the automatic surge protector:
Use appropriate force:
Avoid using excessive force to plug and unplug the plug to avoid damaging the socket or plug.
Adjust the insertion angle:
For sockets with protective covers or safety doors, try to adjust the insertion angle or increase the force.
Manual solution:
You can try to press the plug’s hanging pin with your hand with moderate force, and then gently push the plug into the socket with your other hand. In addition, you can use nail clippers to clamp the metal part of the plug, gently separate the plug from the socket, and then insert it into the socket.
Tool solution:
If the manual method cannot solve it, you can use some tools to solve it. For example, use a pair of fine pliers or small flat-nosed pliers to clamp the two colored plastic parts on the plug, gently bend it, and then insert it into the socket, so that the plug and socket can cooperate more smoothly.
Replace matching plugs and sockets:
Make sure that the specifications of the plug and socket are consistent, and avoid using mismatched plugs and sockets. For aging sockets or plugs, it is recommended to replace new equipment to ensure safety and convenience of use. Choose a socket with good quality and a good brand reputation to ensure safety and convenience of use.
Check and clean the inside of the socket:
If there is foreign matter inside the socket or the metal contact piece is deformed, you need to remove the socket for inspection and cleaning.
Reinstall the socket:
Make sure the socket is firmly installed, and in the correct position, without tilting or looseness.
Overview
The socket at home is too tight, and the automatic surge protector plug is difficult to insert. Solution summary: use appropriate force; adjust the insertion angle; solve it manually; solve it with tools; replace the matching plug and socket; check and clean the inside of the socket; reinstall the socket.
Precautions and automatic surge protector daily maintenance suggestions:
Power-off operation:
When replacing the socket or performing any maintenance operation, be sure to turn off the power first to ensure safety.
Regularly check the socket:
Regularly check the tightness of the socket, and adjust or replace the aging socket in time.
Use the right plug:
Make sure the plug used matches the socket, and avoid using an oversized plug that causes the socket to be too tight.
Automatic surge protector factory tells you that when replacing a socket or performing any maintenance operation, be sure to turn off the power first to ensure safety; check the socket regularly; make sure the plug used matches the socket, and avoid using an oversized plug that causes the socket to be too tight.
The above methods can effectively solve the problem of the automatic surge protector being difficult to insert due to the tight socket, and ensure the safety and convenience of household electricity use.
English 
Español